This post contains affiliate links

This DIY Dog Bed came together in just a few hours. If you have a loved one who adores their small breed dog this would make a great gift!

easy diy pet bed

It all began when I saw this piece at my local ReStore for $10! I knew I had to have it and so it came home with me.

easy diy pet bed

This post contains affiliate links

Upcycled Dog Bed Supplies

 

easy diy pet bed

Step 1) Begin by removing the back of the furniture piece.  This is what we will use to attach the upholstery.

easy diy pet bed

Step 2)  Figure out how far apart you want your buttons by measuring it out with a tape measure and a Sharpie

easy diy pet bed

Step 3)  Using a drill and drill bit, create a small hole where you have placed your mark for your buttons.

Tip:  If you project doesn’t currently have a back, you can use pegboard.  This is great for tufting because the holes are already pre-spaced and drilled for you.

easy diy pet bed

Step 4)  Lay your board with the drilled holes on top of your high density foam.  Using your sharpie, mark the holes on your foam so they match up with your board.

My foam piece was not quite big enough so I centered the foam in the center of the board and then filled in the sides (see below)

easy diy pet bed

Step 5)  I adhered the foam to the back of the board with 3M General Purpose Spray Adhesive  Make sure you match up the holes on your foam to the holes you drilled in the board.

My foam was not quite big enough to cover the entire back so I filled in the sides with Poly-fil.

easy diy pet bed

Step 6)  I recruited a helper (meet Chelsea) to help me hold it while I tufted the upholstery.  To do this, take an extremely long piece of wax button thread and thread it through the Upholstery Needle and tie it in a knot.

Step 7)  Lay the fabric right side up on top of the foam.

Step 8)  Start on the back side and thread the needle through the first hole in the board, up through the foam, through the fabric and then through one of the buttons and then back through the first hole, pulling it tight.  Repeat in each hole but do not cut the thread…leave it in one piece.

I sanded and painted the DIY Dog Bed with Amy Howard At Home Paint in Graphite

Tip: When you are searching for furniture pieces you want to make sure the bones of the piece are good. As long as everything is solid I go ahead and purchase pieces even if I don’t necessarily need them at that moment!

By removing the door, adding some batting with a little bit of bling and a pillow this outdated 70’s furniture is now ready for your little pooch!

dog bed

You all inspire me and I LOVE to see the work that you’ve created. Feel free to share with me on Instagram, Twitter or Facebook. And as always, be sure to follow Diva Of DIY on Pinterest and sign up for our FREE Newsletter to receive the latest projects delivered straight to your inbox!

If you liked this project, check out these:

furniture vanity ikea dresser hack
Furniture Vanity from Ikea Rast Dresser

DIY window coffee table
DIY window coffee table
furniture pet bed
DIY Furniture Pet Bed